瑞士MGC DURESCA Transformer Bushings IEC-IEEE DTOXS RIP-RIS变压器SF6套管.pdfVIP

DURESCA® DTOX(S) Condenser bushings 72.5 – 550kV Transformer to SF6 with Dry-Type insulation RIP and RIS IEC standard 60137:2017 IEC62271-211:2014 中国总代理 陕西天诚电气设备有限公司 邮箱：sales@ 网站： DURESCA® Transformer bushings Swiss quality combined with global experience PRODUCT OVERVIEW Moser Glaser Features Dry-type RIP Insulation Moser Glaser researched a way to increase the dielectric characteristics of its High Voltage equipment. As a result Moser Glaser invented the Epoxy Resin Impregnated Paper (RIP) technology in 1958. With more than 50 years of experience in development of the ERIP technology, Moser Glaser offers transformer bushings DURESCA® DTOX(S) from 72.5 to 550kV. The insulation lays directly on the conductor or tube and consists of crepe paper dried under vacuum and impregnated with epoxy resin. Conductive grading layers are embedded during the winding of the insulation for the best field control. This guarantees the highest operational and human safety. ■ A strong moisture barrier prevents any contamination or moisture ingress. ■ Moser Glaser design does not use any oil; DTOX(S) are completely dry and free of partial discharge. ■ DTOX(S) bushings can be applied at any position from 0° to 90° from vertical and allow for safe horizontal transport and storage. Replacement bushings ■ In addition to the standard range, our design, combined with our production process, allows a wide flexibility and adaptability to provide tailor-made solutions. Moser Glaser can interchange a wide variety of bushings designs. This allows the customer to replace existin