MDS-DH系列驱动规格手册.pdf

MITSUBISHI CNC MDS-DH Series Specifications Manual IB-1500003(ENG)-B MELDAS is a registered trademark of Mitsubishi Electric Corporation. Other company and product names that appear in this manual are trademarks or registered trademarks of their respective companies. Introduction Thank you for selecting the Mitsubishi numerical control unit. This instruction manual describes the handling and caution points for using this AC servo/spindle. Incorrect handling may lead to unforeseen accidents, so always read this instruction manual thoroughly to ensure correct usage. Make sure that this instruction manual is delivered to the end user. Always store this manual in a safe place. All specifications for the MDS-DH Series are described in this manual. However, each CNC may not be provided with all specifications, so refer to the specifications for the CNC on hand before starting use. Notes on Reading This Manual (1) Since the description of this specification manual deals with NC in general, for the specifications of individual machine tools, refer to the manuals issued by the respective machine manufacturers. The restrictions and available functions described in the manuals issued by the machine manufacturers have precedence to those in this manual. (2) This manual describes as many special operations as possible, but it should be kept in mind that items not mentioned in this manual cannot be performed. Precautions for safety Please read this manual and auxiliary documents before starting installation, operation, maintenance or inspection to ensure correct usage. Thoroughly understand the device, safety information and precautions befo