ICAO文件8168仪表与目视程序设计借鉴.pdf

Flight Procedures (Doc 8168) COPYRIGHT JEPPESEN SANDERSON, INC., ALL RIGHTS RESERVED. Revision Date: 1 GENERAL 1.1 This section describes operational procedures and outlines the parameters on which the criteria of ICAO Document 8168, Volume II Construction of Visual and Instrument Flight Procedures,– are based, so as to illustrate the need for pilots to adhere strictly to the published procedures. 1.1.1 With the exception of this introductory material, paragraphs have been extracted in whole or in part from PANS-OPS. The PANS-OPS paragraph numbers are used beginning with Part II. 1.2 PANS-OPS VERSUS PREVIOUS EDITIONS TO PANS-OPS 1.2.1 Instrument Departure and Approach Procedures 1.2.1.1 There are instrument departure and approach procedures published that were developed prior to the ICAO procedures initially established with ICAO Document 8168, Volume I, First and Second Editions. These procedures may have applied different procedure criteria. 1.2.1.2 Procedures developed in accordance with the ICAO Procedures are indicated with a margin notation “PANS-OPS ”, “PANS-OPS 3 ” or “PANS-OPS 4 ”. PANS-OPS indicates that the State has specified that the approach procedure complies with ICAO Document 8168, Volume II, First or Second Edition. PANS-OPS 3 further indicates that holding speeds to be used are those specified in ICAO Document 8168, Volume II, Third Edition. NOTE: For applying the correct holding speed, refer to the respective State RULES AND PROCEDURES page. PANS-OPS 4 further indicates that the acceleration segment criteria have been deleted, as formerly published in ICAO Document 8168, Volume II, First, Second and Third