RS Components 电工电料 同轴连接器 145-0701-601 使用说明.pdfVIP

SMK - 50 Ohm Connectors (2.92mm) INCHES (MILLIMETERS) • 2-Hole Flange Mount Jack Receptacle Mounting Hole Layout ACCEPTS PIN SIZE GOLD PLAT ED PASSIVAT ED .0120 +/- .0005 (0.305 +/- .013) 145-0701-601 145-0701-602 MAT ERIAL SPEC IFICAT IONS Mating Engagement for SMK (2.92mm) Series per MIL-STD-348 Bodies: Stainless steel per QQ-B-626, gold plated* per MIL-G-45204 .00005 min. or passivated per MIL-F- 14072 B (EL) 300 Contacts: Female - beryllium copper per QQ-C-530, gold plated per MIL-G-45204 .00005 min. Contact Support Beads: PT FE uorocarbon per ASTM D 1710 and ASTM D 1457 or modied PPE resin Seal Rings: Silicone rubber per ZZ-R-765 * All gold plated parts include a .00005 min. nickel underplate barrier layer. MECHANICAL RAT INGS Engagement Design: MIL-STD-348, Series SMK (2.92mm) Engagement/ Disengagement Force: 2 inch-pounds maximum Mating Torque: 7 to 10 inch-pounds Coupling Proof Torque: 15 inch-pounds minimum Coupling Nut Retention: 60 pounds minimum Contact Retention: 6 lbs. minimum axial force (captivated contacts) Cable Retention: Axial Force*(lbs) Torque (in-oz) .086 semi-rigid 30 16 .141 semi-rigid 60 55 *Or cable breaking strength whichever is less. Durability: 500 cycles minimum Notes: 1. ID of contact shall meet VSWR and connectivity requirements when mated with dia. .0355-.0365 male pin. Emerson Network Power Connectivity Solutions 299 Johnson Avenue SW, Waseca, MN 56093 • 800 -247- 8256 • +1 (507) 833-882