Dell戴尔Dell PowerEdge M1000e Blade Enclosure and PS Series SAN Design Best Practices using Dell S-Series and M-Series Networking说明书用户手册.pdf

Dell PowerEdge M1000e Blade Enclosure and Dell PS Series SAN Design Best Practices Using Dell S-Series and M-Series Networking Dell EMC Storage Engineering May 2017 Dell EMC Best Practices Revisions Date Description February 2013 Initial release May 2017 Minor updates Acknowledgements This white paper was produced by the PG Storage Infrastructure and Solutions team of Dell Inc. The team that created this white paper: Clay Cooper, Guy Westbrook, and Camille Daily Updates provided by: Steven Lemons The information in this publication is provided “as is.” Dell Inc. makes no representations or warranties of any kind with respect to the information in this publication, and specifically disclaims implied warranties of merchantability or fitness for a particular purpose. Use, copying, and distribution of any software described in this publication requires an applicable software license. Copyright © 2013 - 2017 Dell Inc. or its subsidiaries. All Rights Reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be the property of their respective owners. Published in the USA [5/9/2017] [Best Practices] [BP1039] Dell believes the information in this document is accurate as of its publication date. The information is subject to change without notice. 1 Dell PowerEdge M1000e Blade Enclosure and Dell PS Series SAN Design Best Practices Using Dell S-Series and M-Series Networking | BP1039 Table of Contents 1 Introduction4 1.1 Audience 4 1.2 Terminology 5 2 Concept Overview 7 2.1 PowerEdge M1000e blade chassis solution7 2.1.1 Multiple Fabrics7 2.1.2 M-Series Blade I/O modules8 2.2 PS Series SAN architecture 8 2.3