ASTM B398 B398M-1999 电气用铝合金6201-T81线.pdfVIP

NOTICE: This standard has either been superseded and replaced by a new version or discontinued. Contact ASTM International () for the latest information. Designation: B 398/B 398M – 99 Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes1 This standard is issued under the fixed designation B 398/B 398M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval. 1. Scope 2.4 NIST Standard: 1.1 This specification covers aluminum-alloy 6201-T81 NBS Handbook 100—Copper Wire Tables6 (hard: solution heat-treated, cold worked, and artificially aged) 3. Terminology round wire for electrical purposes. 3.1 Definitions of Terms Specific to This Standard: NOTE 1—The alloy and temper designations conform to ANSI H35.1/ 3.1.1 lot—A group of production units, up to 30 000 lb [15 H35.1M. Aluminum-alloy 6201 corresponds to unified numbering system metric tons] of mass, of one type and size of wire, which was alloy A96201 in accordance with Practice E 527. produced during the same time period, under similar produc- 1.2 The values stated in inch-pound or SI units are to be tion conditions, and is presented for acceptance at the s