AEC - Q200-003 - Rev-B - Beam Load - Break Strength - Test梁荷载。断裂强度。试验.pdf

AEC-Q200-003 REV B June 1, 2010 Automotive Electronics Council Component Technical Committee ATTACHMENT 3 AEC - Q200 - 003 - REV B BEAM LOAD (BREAK STRENGTH) TEST Page 1 of 5 AEC-Q200-003 REV B June 1, 2010 Automotive Electronics Council Component Technical Committee NOTICE AEC documents contain material that has been prepared, reviewed, and approved through the AEC Technical Committee. AEC documents are designed to serve the automotive electronics industry through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for use by those other than AEC members, whether the standard is to be used either domestically or internationally. AEC documents are adopted without regard to whether or not their adoption may involve patents or articles, materials, or processes. By such action AEC does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the AEC documents. The information included in AEC documents represents a sound approach to product specification and application, principally from the automotive electronics system manufacturer viewpoint. No