亚马逊托盘入库要求和箱装要求指导-July 2015(1).pdfVIP

托盘入库要求和箱装要求 Pallet Requirements 托盘的标准  Wooden, 40 inches x 48 inches,4-way across 木头，40英寸X48英寸(102X122cm)，４路可叉型  GMA Standard Grade B or higher GMA B 级标准或更高标准 (基本都符合，可以不深究)  One shipment ID per pallet 每个托盘只有一个运输ＩＤ  Do not overhang pallet by more than 1 inch 托盘突出部分不超过１英寸  Use clear stretch-wrap 使用透明的拉伸缠绕膜  Shipment labels on all 4 sides. If the pallet is wrapped in plastic, the pallet labels must be placed on the outside of the plastic wrap. 在所有四边都有运输标签。如果托盘被塑料膜包装，标签应在 塑料包装外面。  Must be wrapped in plastic with a “do not break stretch wrap” or “do not break down” notification to the carrier. 必须被塑料包起来并有“do not break stretch wrap” 或“do not break down”告示给 承运商。  Do not ship Units on PECO pallets 不要用PECO托盘  Pallet is pure by item 单个托盘内的产品是同一单一产品。 Pallet weight  托盘重量  Less than or equal to 1,500 lb. 不超过1500磅(1磅=0克(公斤)) Pallet height   Less than or equal to 1.2米. Carton box weight and Size  箱子的重量和尺寸  Boxes must not exceed the standard weight limit of 50 lb., unless they contain one single Oversize* Unit that exceeds 50 lb. 箱子的标准重量不得超过50磅的限制，除非这个箱子是 只装一件超尺寸而且重量超过了50磅的货物。  For a single Oversize* Unit that exceeds 50 lb., attach a label that clearly indicates Team Lift on the top and sides of the box. 对于单件超尺寸的单件货物，其重量超过50磅的，要在箱子 的四周和顶部贴上“Team Lift” 的标签。  For a single Oversize* Unit that exceeds 100 lb., attach a label that clearly indicates “Mech Lift” on the top and sides of the box. 对于单件货物超尺寸且超过100磅的，要在箱子的四周和顶 部贴上“Mech Lift” 的标签。  Boxes containing Jewelry or Watches must not exceed 40 lb. 装有珠宝和手表的箱子不能超过 40磅。  If you are using an Amazon-Partnered carrier, accurately weigh and measure boxes and pallets to ensure that the correct values are supplied for every shipment. 如果你是使用AMAZON合作 的承运人，请准确地称重，测量箱子的尺寸和打板，确保每一票货物的价值得到正确地传 递。