Panasonic松下 焊接电源YD-400KR2HJG说明书.pdf

Operating Instructions Thyristor Controlled MIG/MAG ArcWelding Power Source Mo d e l No . Y D-400KR ● Thank you for your purchase of Panasonic welding power source. ● Before operating this product, please read the instructions carefully and save this manual for future use. First of all, please read “Safety precautions” or “Safety manual”. ● SPEC. No.： YD-400KR2HJG Panasonic Welding Systems (Tangshan) Co., Ltd. TSM80563-04 WARNINGS AND CAUTIONS FOR SAFETY For your safety, be sure to observe the following. ■ ！ Warning! In Order to Avoid Serious Accident Result in Injury or Death  Carry Out Grounding Work: In order to prevent you from getting an electric shock, carry out grounding work provided by the law.  Wear The Proper Work Uniform and Safety Protective Gear: In order to prevent inflammation of your eye or skin burn, wear a proper protective gear.  Carry out Ventilation: In order to prevent gas-poisoning or suffocation (welding fume and carbon monoxide are harmful to the human body), install a local exhauster, etc. or use an effective inhaler. ■ ！ Caution ！In Order to Prevent Burn-Out of Equipment or Fire  Prevent a Fire or Burn-out of the Equipment due to Overheat: Install a welding power unit 20 cm or more away from the wall and 50 cm or more from an inflammable substance.  Prevent a Fire or Burn-out of the Equipment due to Spark: See to it that spark (spatter, flash) will never reach an Inflammable substance or fall on the equipment and enter inside through an air Inlet or opening.  Prevent an Injury to Your Body or Damage on the Equipment due to a Fall or Overturn: When installing the equipment on the trestle, secure safety by preventing its dislocation or fixing it with anchor bolts. (Be sure to prevent a gas bomb from turning