UR E13 旋转电机测试　.docxVIP

E13Test requirements for Rotating Machines(1996) (Rev.11. GeneralMay 2001) (Corr.1 All machines are to be tested by the manufacturer. May 2004)(Rev.2 Manufacturers test records are to be provided for machines for essential services, for other Aug 2015) machines they are to be available upon request. (Corr.1June 2018) All tests are to be carried out according to IEC 60092-301. All machines of 100kW and over, intended for essential services, are to be surveyed by the Society during test and, if appropriate, during manufacturing. Note: An alternative survey scheme may be agreed by the Society with the manufacturer whereby attendance of the Surveyor will not be required as required above. Shaft Material Shaft material for electric propulsion motors and for main engine driven generators where the shaft is part of the propulsion shafting is to be certified by the Society. Shaft material for other machines is to be in accordance with recognised international or national standard. Tests Type tests are to be carried out on a prototype machine or on the first of a batch of machines, and routine tests carried out on subsequent machines in accordance with Table 1. Note: Test requirements may differ for shaft generators, special purpose machines and machines of novel construction. Note: Rev.2 of this UR is to be uniformly implemented by IACS Societies for rotating machines: when an application for certification of a rotating machine is dated on or after 1 January 2017; orwhich are installed in new ships for which the date of contract for construction is on or after 1 January 2017. The contracted for construction^^ date means the date on which the contract to build the vessel is signed between the prospective owner and the shipbuilder. For further details regarding the date of contract for constructionn, refer to IACS Procedural Requirement (PR) No. 29. Table 1 No. Tests A.C. Generators Motors Type test1) Routine test2) Type test1) Routine test2) 1. Examination of the technical