Yokogawa横河电机 Discontinued Model WTU-08 Power Distributor Unit使用说明书.pdf

] Model UTU-08 JUXT WSIruc on Pouer Distributor Unit | 1. INSPECTION FlG.1 FRK- 16 This unit has been thoroughly tested at the factory before shipment. jen you recejive it， TEL 1 Yisually inspect it for damage and check the accesSsories , 00 00 00 00 1.1 Model -number and specification check 一 Check to see the model number and specification on the nageplate attached to the bottom face of 王 宇 乌 呈 所 到 总 己 呈 the unit are as ordered. Distributer Unit TI.2 Contents of the instruction manual Fle 2 WTU- 08 This instruction manual provides instructions “ on Wiring and mouriting methods of distributor _ 50 区 ， 总 Unit。 3 有 二 2. GENERAL 局 2 This unit Supplies power to JUXTA transmitter。 上 52 ca be mounted on rack，DIN 生 过 apd wal1l. 中 Supplying power to transmjitter through connector makges easy for its maintenance-. 423WU-08 18 ， 人 -45x10 small oval hole 、Disitributor nit Accessories : _ Wanting Screw WWx0. 了 Coqnector 早生 Wire 9 Base AssSembiy 1 Set ， (Bracket ...- 1 pair， Fi 3 Bestet id Screw ,. .4，JM Screw ..、4) 3.MOUNTING METHOD 3.1 Rack Mounting 起 Fix distributor unit to the bottom of panel (FRK-16)》 with screw。(See Fig.1) 人 In ease of wa1L mounting by Sing panel 《FERK-16) ， fix Betal fittings direct to the wall and install the distributor unit on these metal fittings。 (See Fig. 2 and 3) 3.2 DIN Rail Mounting When combining the distributor unit with the transmitter mounted on DIN rai1， 了 ix the metal fittings direct to the wall and install the distributor unit on these metal fittings. 本 We (See Fig. 3and4) 5 ee 4。 EXTERNAL 人 TIRING PIG.4 DIN Ra 让 Use fuirnished connector with cable of distributor . unit and connect crim