NI STS T2 M2功能使用手册.pdfVIP

STS T2 M2 Mounting 2023-03-01 STS T2 M2 Mounting Contents Mount the STS to a Manipulator 3 Mounting the STS Using the Side-Mount Manipulator Bracket 3 Mounting the STS Using the Rear-Mount Manipulator Bracket 6 Installed Load Board Position 1 Mounting Docking Hardware to the STS Top-Plate 11 STS Center of Gravity 15 STS Empty Bay Mounting Interface Enclosure 25 Mounting the Fan Power Kit to Corner 3 29 Mounting the Auxiliary Fan Panel Assembly to an Empty Bay 31 Manipulator, Handler, and Prober Communication 33 / STS T2 M2 Mounting Mount the STS to a Manipulator Notice Adhere to the ventilation clearance specifications in the STS Safety, Environmental, and Regulatory Information when designing mounting hardware for the STS. Manipulator Bracket Part Number Tumble Motion Support Side-Mount Manipulator 149119-01 Yes Bracket Kit更 Rear-Mount Manipulator 133199-01 No Bracket Kit@ Table 1. STS Manipulator Bracket Options Related information: ■ STS T2 M2 Safety, Environmental, and Regulatory Information :The side mount manipulator bracket allows for tester tumble motion around the tester center of gravity when paired with a tumble motion capable manipulator. 3 The rear mount manipulator bracket reduces the combined width of the testerand manipulator within the test cell for pairing with probers and handlers that have limited space. Mounting the STS Using the Side-Mount Manipulator Bracket The STS provides four mounting holes on the STS side-mount manipulator brackets. Both manipulator brackets must be installed on the STS when mounting the STS to