ASUS华硕主板玩家国度(ROG)ROG MAXIMUS Z790 APEX M.2 Installation Guide ( 英文版 ).pdf

ALL E21401 AL ne November 2022 ROG MAXIMUS Z790 APEX M.2 Installation Guide To install an M.2to your motherboard, please follow the steps below: 4 Supported M.2 type varies per motherboard. The illustrations only show the installation steps fora single M.2 slot, the steps are the same for the other M.2 slots fyou wish to install an M.2 to another M.2 slot. * Usea Philips screwdriver when removing or installing the Screws or screw stands mentioned in this section, ， 和 fthe thermal pad on the M.2 heatsink becomes damaged, we recommend replacing it with a thermal pad with a thickness of 1.25mm. * The M.2is purchased separately- 1 Loosen the Screws from the M,2 heatsinks. 2. Lift and remove the heatsinks. 1 多 @ 隐 3 Install your M.2 to your M.2 slot The steps may differ between installing M.2 of different lengths, please refer to the different types and their installation steps below: 昌 To install an M.2 to M.2_1 and M.2_ 2 slot For 2280 length 太 . Remove the plastic film from the thermal pad B. Rotate and adjust the M.2 Q-latch at the 2280 position so that the handle Points away from the M.2 slot， C. Install your M.2 to the M.2 slot. D. Rotate the M.2 Q-Latch clockwise to secure the M.2 in place. For 2242 and 2260 length A. Remove the plastic flm from the thermal pad. B. Remove the thermal pad of the M.2 length Screw hole you wish to install your M.2 to， then install the M.2 Q-latch. C- Rotate and adjust the M.2 Q-latch so that the handle points away from the M.2 slot, D. Install your M.2 to the M.2 slot. E. Rotate the M.2 Q-Latch clockw