基恩士 CV-X 系列 便捷设定手册 控制与通讯篇 PLC链接 (MELSEC FX系列) EN.pdf

358GB High-speed, High-capacity Machine Vision System CV-X Series Control/Communication PLC-Link Easy Setup Guide (MELSEC FX Series) Contents Easy Setup Guide: Control/Communication PLC-Link (MELSEC FX Series) 1. Establishing the PLC-Link (RS-232C PLC-Link) Page 3 2. Outputting the Measured Value/Judged Value (PLC-Link) Page 6 3. Controlling the Controller (PLC-Link) Page 9 Trademarks Product names, etc. noted in this document are registered trademarks or trademarks of their respective companies. The ™ mark and ® mark have been omitted in this manual. KEYENCE CORPORATION. Vision System Division ‐ 2 ‐ 1. Establishing the PLC-Link (RS-232C PLC-Link) [MELSEC FX Series] ✎Checking the Global Settings of the CV-X Series This section describes how to establish the PLC‐Link. [Important] If it fails, follow this manual to configure the settings and check the operations. Confirm that it operates properly, and change settings if necessary. 1 On the Global menu, select [Communications I/O] [PLC-Link]. Configure the PLC‐Link settings. Mode: PLC- Link (RS- 232C) PLC Type: MELSEC FX Series Baud Rate: 19200