安装施工管理.pptxVIP

安装施工管理第1页/共14页 Company Logo2012.07.29一 质量管理 quality management材料的质量管理Quality management of materials质量管理quality management施工过程的质量管理Construction procedure of quality management第2页/共13页第2页/共14页 Company Logo2012.07.29一 质量管理quality management 材料要执行样品制，材料进场前两周由施工单位提供材料的样品，经监理、甲方验收合格并封样后，方可大批进场；The contractor should provide material sample before materials come into the site 2weeks in advance. Material can deliver to the site after the material acceptance is qualified and the sample is sealed by client and supervisor. 材料进场要有监理、施工单位人员在场，并由施工单位提供本批次质材料的量合格证，检测报告。The contractor should provide certification of the material and test report. The supervisor and contractor should be in place during material coming.材料的质量管理Quality management of materials第3页/共13页第3页/共14页 Company Logo2012.07.29一 质量管理quality management 提供项目施工组织方案，每项分部工程提供专项施工方案。 Provide project construction schedule and branch project construction schedule. 实行样板制，分部工程必须先做样板，施工单位自检合格后，经监理、业主检查合格方可大面积施工。The contractor should provide sample before construction. The contractor can start construction of large area after the check by contractor, supervisor and client is qualified.施工过程的质量控制Quality control of construction procedure 隐蔽工程必须进行检测，涉及到要求闭水试验及水压试验的，要求进行完试验后方可隐蔽。The concealed work must be tested. It is necessary to do water test and water pressure test. The work can be concealed after the test is qualified.分部分项工程的验收Acceptance of branch project第4页/共13页第4页/共14页 Company Logo2012.07.29一 质量管理quality management材料样品展台platform for material sample网架球节点样品（气体保护焊）Framework ball joint sample (gas protection welding )现场手工焊 （经探伤检测）Manual welding on site (pass detection test)第5页/共13页第5页/共14页 Company Logo2012.07.29一 质量管理quality management 地坪样板concrete floor sample施工缝传力杆连接筋 dowel bar in construction joint地坪施工前制作样板 making sample before construction制作样品后进行技术交流technical coordination after sample is completed总结施工不足处 summary shortcomings during construction针对理论结合实际情况进行工艺改进provide process improvement measurements