Danfoss丹佛斯Danfoss C-632X Assembly Instructions 安装指南.pdf

C-632X assembly Danfoss C-632X assembly instructions The C-632X consists of the CB-63X cabinet base, the C-15X cabinet, and two C-63X cabinets. This cabinet is a space saving, efficient addition to the modern store with a lobby type sales area. It requires a minimum amount of space, but does a maximum job merchandising a wide variety of products in 126 clear drawers. An additional 15 large, high impact drawers located in the bottom section provide ample space for large or heavy items. Dimensions: 68-1/2”H x 30” W; 15” Deep. Weight: 167 lbs. Materials list: (1) CB-63X cabinet base (2) M6 x 1 plastic knobs (1) C-15X cabinet assembly (24) Washers (contains 15 drawers and 30 dividers) (8) M5 x 0.8 bolts, 45mm length (2) C-63X cabinet assemblies (4) M5 x 0.8 bolts, 60mm length (each cabinet contains 63 drawers and 189 dividers) (12) M5 x 0.8 wing nuts Tools required (1) 8 mm wrench Assembly Instructions on reverse Assembly Instructions: Step 1 - Insert the two knobs into the feet of the CB-63X cabinet base from the bottom as shown in Figure A. Step 2 - Stand the CB-63X cabinet base up on its side as shown in Figure B. Figure A Figure F Step 3 - Lay the C-15X fifteen drawer cabinet on its side positioned against t