模具策划书全.pptVIP

ILLUMINATION FRONT MOUNTVersion RecordMODEL DateContentDesignerVersion2006.02.07Tooling Concept CreationCAMBYA2006.02.14Tooling Concept UpdateJOYCE_WANGB Basic Information: P3MODEL CHECK: P4Gate: P5Parting Line Description: P6,P7Insert Design: P8~P13Ejector Pin: P14Engraving: P15Surface Finish: P16,P17Draft Angle: P18,P19Content: Kindly confirm below informationPlastic material Grade : PC –lupilon GSN-2030DFPart No. Cav No. :TBD2D drawing with Tolerance (FAI require) :OKSteel of moldbase :4130Core steel :8407MSCavity steel :8407MSTexture info. area :CAVITY:SPI-B1,CORE:SPI-B2,SPI-B1,VDI-18Plastic Surface Secondary Operation Requirement: N/AShrinkage: 0.5 %Please confirm above items and feedback to us, Thanks! Model Check-Contents-MODEL Accuracy : 0.006MODEL Length / Width :85.53X75.34Curve Surface Quality: GoodAverage Part Thickness: 1.5 mmMaximum Thickness: 4.4 mmMinimum Thickness: 0.55 mmParts Assembly Check :N/A Gate info (SUB Gate)1.5mm Parting Line Description PL Parting lines show as Red ones.CAVITY SIDECORE SIDECAVITY SIDECORE SIDE Parting Line Description PL Parting lines show as Red ones.CAVITY SIDECORE SIDECAVITY SIDECORE SIDEPL０．１mm０．１mm1.建議此區逃肉0.1mm並修改脫模角方向,以簡化製作PL，以利合模(共4處)We suggest to recess material by 0.1mm in the area, also modify draft direction in order to simplify PL making, be able to cramp (in total 4 areas). CAVITY SIDE 2° Insert (Cavity)N02N01InsertN03N04 Insert Core Pin info (core)Core PinN54Core PinP51P51P51P51N53N52N51 Insert Suggestion (core)CORE SIDE 1°5°2.建議修改此處脫模角以避免模具脆弱(共六處)We recommend to modify the draft angle to prevent mold weakness. (six areas)PL1mmCORE SIDE 1°8°1mmCAVITY SIDE 5° Insert Suggestion (core)CORE SIDE 1°5°3.建議修改此處脫模角方向，以利模具靠破，避免模具脆弱(共三處)We suggest to modify the draft direction, for better shut off, to prevent the weakness of the tool. (three areas)PL1mmCAVITY SIDE 5° Insert Suggestion (core)4.建議取消R角以避免入子倒勾, 取消C角以避免入子脆弱Suggest to remove radii to prevent undercuts of the insert, also remove Chamfers for weakn