公路和桥梁工程项目管理指引 Construction Management Guideline for Road and Bridge.pdf

The Project for Capacity Development of Road and Bridge Technology in the Republic of the Union of Myanmar (2016-2019) CONSTRUCTION MANAGEMENT GUIDELINE FOR ROAD BRIDGE (1st Edition) April 2019 Ministry of Construction, the Republic of the Union of Myanmar Japan International Cooperation Agency INTRODUCTION BACKGROUND The bridge construction technology has maintained in certain technological level since “Bridge Engineering Training Center (BETC) Project (1979-1985: JICA), however, new technology has not been transferred and bridge types that can be constructed in Myanmar are still limited. Besides, insufficient training for national engineers has hampered sustainable transfer of technology in bridge engineering. In this context, the Government of Myanmar requested “the Project for Capacity Development of Road and Bridge Technology” (hereinafter referred to as “the Project”) to the Government of Japan. Through series of discussion, Ministry of Construction (MOC) and JICA concluded the Record of Discussion (R/D) in January 2016 to implement the Project focusing on capacity development on construction supervision of bridges and concrete structures. The Project was implemented for 3 years since 2016 in corroboration with MOC staff officer and JICA Experts aiming at improvement of quality as well as safety in construction of bridges and concrete structures. As the achievement of the Project, the Manuals on Quality and Safety Control for Bridge and Concrete Structure were developed in 2019 after several workshop and discussion. REFERENCES Following technical documents were referred as reference