科勒KD225-KD440发动机维修手册 英文.pdf

WORKSHOPMANUAL

KD225-KD315-KD350

KD400-KD440

KD

225_315_350_400_440

PREFACE

- Every attempt has been made to present within this service manual, accurate and up to date technical

information.

However, development on the KOHLER series is continuous.

Therefore, the information within this manual is subject to change without notice and without obligation.

- The information contained within this service manual is the sole property of KOHLER.

As such, no reproduction or replication in whole or part is allowed without the express written permission of

KOHLER.

Information presented within this manual assumes the following:

1 - The person or people performing service work on KOHLER series engines is properly trained and equipped to

safely and professionally perform the subject operation;

2 - The person or people performing service work on KOHLER series engines possesses adequate hand and

KOHLER special tools to safely and professionally perform the subject service operation;

3 - The person or people performing service work on KOHLER series engines has read the pertinent information

regarding the subject service operations and fully understands the operation at hand.

-This manual was written by the manufacturer to provide technical and operating information to authorised

KOHLER after-sales service centres to carry out assembly, disassembly, overhauling, replacement and tuning

operations.

- As well as employing good operating techniques and observing the right timing for operations, operators must

read the information very carefully and comply with it scrupulously.

- Time spent reading this information will help to prevent health and safety risks and financial damage.

Written informat